MINES Saint-Étienne - Inspiring innovation
LinkedIn Youtube Instagram Research Gate Google Scholar
UK
Rechercher
Close
Menu

Research

Home | Research | Centres and Departments | Flexible Electronics Department (FEL) | Publications

Publications

2023

  1. J. V. Dcosta, D. Ochoa, S. Sanaur, “Extensive Properties Investigation of AgNWs-PEDOTSS Based Transparent Conductive Electrode for Ultraflexible Organic Photodetector Applications“, Advanced Electronic Materials, (2023)
  2. J. V. Dcosta, D. Ochoa, S. Sanaur, “Recent Progress in Flexible and Wearable All Organic Photoplethysmography Sensors for SpO2 Monitoring” Advanced Science, (2023)
  3. E. Kharbouche, M. Ramuz, F. Bernier, C. Calmes, S. Blayac, “Non-contact gravitational energy harvesting from solid spheres using a two-stage triboelectric nanogenerator“, Nano Energy, 108861, (2023)
  4. G. Sych, P. Rannou, M. Jullien-Palletier, S. Sadki, Y.Bonnassieux, S. Sanaur, “Impact of Charge Carrier Injection/Extraction Performances in Low-Dimension PEDOT:PSS Organic Electrochemical Transistors“, Advanced Electronic Materials, (2023)
  5. J. Troughton, P. Brige, M. Ramuz; “Flexible, Implantable, Pulse Oximetry Sensors: Toward Long-Term Monitoring of Blood Oxygen Saturations“, Biomedical Materials & Devices, 1-13, (2023)
  6. O. Kassem, V. Barnier, M. Nasreldin, J. Reslan, A. Aoufi, A. Ravichandran, S. Sao-Joao, K. Hoummada, A. Charai, M. Rieu, J.-P. Viricelle, T. Djenizian, S. Mohamed, “Selective Growth of Graphene-Confined Inkjet-Printed Sn Nanoparticles on Plastic Using Intense Pulsed Light Annealing“, ACS Applied Materials & Interfaces, (2023)
  7. V. Gaubert, X. Boddaert, T. Djenizian, R. Delattre, “Textile Electronic Circuits from Laser‐Patterned Conductive Fabric“, Advanced Engineering Materials, (2023)
  8. N. A. Alwattar, F. Vacandio, L. Vassalo, T. Djenizian, B. Coulomb, J.-L. Boudenne, “Effects of Mode of Preparation of Titanium Dioxide Nanotube Arrays on Their Photocatalytic Properties: Application to p-Nitroaniline Degradation“, Micro, (2023)

2022

  1. A. Albertengo, M. Nasreldin, M. Ramuz, D. Ochoa, R. Delattre, M. Lepikhin, A. Galeyeva, F. Malchik, T. Djenizian, “Enhancing Electrochemical Performance of Stretchable/Flexible Li-Ion Microbatteries by Tuning Microstructured Electrode Dimensions“, Advanced Materials Interfaces, 2102541 (2022) (IF=6.4)
  2. V. Gaubert, G. Vauche, J. Weimmerskirch-Aubatin, C. Corbier,X. Boddaert, R. Delattre, T. Djenizian, “Towards autonomous wearable triboelectric systems integrated on textiles“, iScience, 105264, (2022) (IF=6.1)
  3. L Fliegans, J Troughton, V Divay, S Blayac, M Ramuz; “Design, Fabrication and Characterisation of Multi-Parameter Optical Sensors Dedicated to E-Skin Applications“, Sensors 23 (1), 114, (2022)
  4. J. Troughton, N. Peillon, A. Borbely, J. Rodriguez-Pereira, D. Pavlinak, J. M. Macak, T. Djenizian, M. Ramuz; “High conductivity PEDOT: PSS through laser micro-annealing: mechanisms and application”
    Journal of Materials Chemistry C 10 (43), 16592-16603, (2022)
  5. H. Sopha, C. Ghigo, S. Ng, M. Alijani, L. Hromadko, J. Michalicka, T. Djenizian, J. M. Maca; “TiO2 nanotube layers decorated by titania nanoparticles as anodes for Li-ion microbatteries“; Materials Chemistry and Physics 276, 125337, (2022)
  6. V. Gaubert, G. Vauche, J. Weimmerskirch-Aubatin, C. Corbier, X. Boddaert, R. Delattre, T. Djenizian, “Towards Autonomous Wearable Triboelectric Systems Integrated on Textiles“; Iscience, 105264, (2022)
  7. V. Galstyan, J. M. Macak, T. Djenizian; “Anodic TiO2 nanotubes: A promising material for energy conversion and storage“; Applied Materials Today 29, 101613, (2022)
  8. F. Malchik, K. Maldybayev, T. Kan, S. Kokhmetova, A. Kurbatov, A. Galeyeva, N. Tubul, N. Shpigel, T. Djenizian; “Application of a conversion electrode based on decomposition derivatives of Ag 4 [Fe (CN) 6] for aqueous electrolyte batteries“; RSC advances 12 (16), 9862-9867, (2022)
  9. T. BOUYON YENDA, C. JIGUET-JIGLAIRE, I. KHICHANE, Q. GOBERT, R. PRABHAKARAN, A. DE NONNEVILLE, T. DJENIZIAN, S. SALAS, F. DALLEMER; “Controlled Synthesis of Small Water-Soluble Hybrid Gold Nanoparticles: an Optimized Strategy for Stable Nano-dispersion and Towards Cellular Uptake“, Frontiers in Mechanical Engineering, 15, (2022)
  10. AA Atchabarova, SK Abdimomyn, DA Abduakhytova, YR Zhigalenok, RR Tokpayev, KK Kishibayev, TN Khavaza, AP Kurbatov, YV Zlobina, TJ Djenizian; “Role of carbon material surface functional groups on their interactions with aqueous solutions“; Journal of Electroanalytical Chemistry 922, 116707, (2022)
  11. M. Fayolle, S. De Mulatier, R. Delattre, S. Blayac; “Demonstration of near-field capacitive standard communication bus for ultrathin reconfigurable sensor nodes“; IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS), (2022)

2021

  1. S. Mukherjee, A. Albertengo, T. Djenizian, “Beyond flexible-Li-ion battery systems for soft electronics“, Energy Storage Materials, 42, 773–785 (2021) (IF=20.831)
  2. A. Ravichandran, F. Depoutot, E. Kharbouche, M. Hamand, M. Ramuz, S. Blayac, “Demonstration of friction-based triboelectric nanogenerator and integration in a power-balanced fully autonomous system“, Nano Energy, 83, 105796 (2021) (IF=16.6)
  3. S. Regal, J.G. Trougton, T. Djenizian, M. Ramuz, “Biomimetic models of the human eye, and their applications“, Nanotechnology, 32, 302001 (2021) (IF=3.9)
  4. J.G. Troughton, B. Marchiori, R. Delattre, S. Escoubas, M.Y. Aliouat, S. Grigorian, M. Ramuz, “Simultaneous measurement of electrical characteristics and microstructure of crystallised PEDOT: PSS based OECTs under strain“,  Organic Electronics, 92, 106108 (2021) (IF=3.7)
  5. J.G. Troughton, B. Marchiori, R. Delattre, S. Escoubas, M.Y. Aliouat, S. Grigorian, M. Ramuz, “Raw and processed data used in the simultaneous analysis of electrical characteristics and microstructure of crystallised PEDOT: PSS based OECTs under strain“, Data in Brief, 35, 106946 (2021) (IF=1.7)
  6. J. S. Mandelli, J. Koepp, A. Hama, S. Sanaur, G. A. Rae, C. R. Rambo; “Cell viability and cytotoxicity of inkjet-printed flexible organic electrodes on parylene C“; Biomedical Microdevices 23 (1), 1-12, (2022)
  7. S. Kokhmetova, T. Kan, F. Malchik, A. Galeyeva, T. Djenizian, A. Kurbatov; “Effect of the MoS2 surface layer on the kinetics of intercalation processes in the NaFe (SO4) 2/C composite“; Materials Today Communications 28, 102723, (2022)
  8. A. Bharwal, G. D Salian, L. Manceriu, A. Mahmoud, F. Alloin, C. Iojoiu, T. Djenizian, C. M Ruiz, M. Pasquinelli, T. Toupance, C. Olivier, D. Duché, J.-J. Simon, C. Henrist; “Plasticized I2-free polysiloxane ionic conductors as electrolytes for stable and flexible solid-state dye-sensitized solar cells“; Applied Surface Science Advances 5, 100120, (2022)

2020

  1. M Nasreldin, R. Delattre, C. Calmes, M. Ramuz, V. A. Sugiawati, S. Maria, J-L de Bougrenet de la Tocnaye, T. Djenizian, “High Performance Stretchable Li-ion Microbattery“, Energy Storage Materials, 33, 108 (2020). (IF=16.8)
  2. S. de Mulatier, D. Coulon, R. Delattre, S. Blayac, and M. Ramuz. “Copper-Leaf-Based Process for Imperceptible Computational Electronics”, Advanced Electronic Materials, 6, 1900787, (2020). (IF= 6)
  3. M Nasreldin, S. de Mulatier, R. Delattre, M. Ramuz, T. Djenizian, “Flexible and stretchable microbatteries for wearable technologies“, Advanced Materials Technologies, Hall of Fame, 2000412 (2020). (IF=6.4)
  4. T. Tesfaye, H. Sopha, A. Ayobi, R. Zazpe, J. Rodriguez-Pereira, J. Michalika, S. Ng, Z. Spotz, L. Hromadko, J. Prikryl, J. M. Macak, T. Djenizian, “TiO2 Nanotube Layers Decorated with Al2O3/MoS2/Al2O3 as Anode for Li-ion Microbatteries with Enhanced Cycling Stability“, Nanomaterials, 10, 953 (2020). (IF=4.1)
  5. A. Sugiawati, F. Vacandio, T. Djenizian, “All-Solid-State Lithium Ion Batteries Using Self-Organized TiO2 Nanotubes Grown from Ti-6Al-4V Alloy“, Molecules, 25, 2121 (2020). (IF=4.1)
  6. Djenizian and N. H. Voelcker, “Editorial: Advances in porous semiconductor research“, Front. Chem., 8, 122 (2020). (IF=3.7)
  7. A. Sugiawati, F. Vacandio, N. Yitzhack, Y. Ein-Eli, T. Djenizian, “Direct Pre-lithiation of Electropolymerized Carbon Nanotubes for Enhanced Cycling Performance of Flexible Li-Ion Micro-Batteries“, Polymers, 12, 406 (2020). (IF=3.7)
  8. S. Regal, J. Troughton, R. Delattre, T. Djenizian, M. Ramuz, “Changes in temperature inside an optomechanical model of the human eye during emulated transscleral cyclophotocoagulation“, Biomedical Optics Express, 11, 4548 (2020). (IF=3.9)
  9. AN Ravichandran, S Blayac, M Ramuz, “Contactless strain sensor using electret technology for highly sensitive stretch based applications“,
    IEEE Sensors Journal (2020). (IF=3)
  10. B. Marchiori, S. Regal, Y. Arango, R. Delattre, S. Blayac, M. Ramuz, “PVDF-TrFE-Based Stretchable Contact and Non-Contact Temperature Sensor for E-Skin Application“. Sensors, 20, 623 (2020). (IF=3.3)
  11. X. Liu, X. Su, C. Livache, L-M. Chamoreau, S. Sanaur, L. Sosa-Vargasa, J-C. Ribierre, D. Kreher, E. Lhuillier, E. Lacaze, F. Mathevet
    “Investigation of charge transport properties of [1]Benzothieno[3,2-b][1]-benzothiophene single-crystals in field-effect transistor configuration“. Organic Electronics, 78, 105605 (2020). (IF=3.4)
  12. J. S. Mandelli, J. Koepp, A. Hama, S. Sanaur, G. A. Rae, C. R. Rambo
    “Cell viability and cytotoxicity of inkjet-printed flexible organic electrodes on parylene C“. BioMedical MicroDevices (2020). (IF =2.2)

2019

  1. A. Ravichandran, C. Calmes, J. Serres, M. Ramuz, S. Blayac, “Compact and High Performance Wind actuated venturi triboelectric energy harvester”, Nano Energy, 62, (2019). (IF= 16.6)
  2. D. Salian, M. Krbal, H. Sopha, C. Lebouin, M. V. Coulet, J. Michalika, L. Hromadko, A. T. Tesfaye, J. M. Macak, T. Djenizian, “Self-supported sulphurized TiO2 nanotube layers as positive electrodes for lithium microbatteries“, Applied Materials Today, 16, 257 (2019). (IF=8.1)
  3. O. Kassem , M. Saadaoui, M. Rieu, J-P Viricelle, “A novel approach to a fully inkjet printed SnO2-based gas sensor on a flexible foil“, Journal of Materials Chemistry C, 39, (2019). (IF= 6.6)
  4. A. T. Tesfaye, F. Dumur, D. Gigmes, S. Maria, L. Monconduit, T. Djenizian, “Superior Electrochemical Performance of Thin-Film Thermoplastic Elastomer-Coated SnSb as an Anode for Li-ion Batteries”, Sci. Rep., 9, (2019). (IF= 4.1)
  5. S. Hannah, P. Brige, A. Ravichandran and M. Ramuz, “Conformable, Stretchable Sensor To Record Bladder Wall Stretch”, ACS Omega 4, (2019). (IF = 2.5)
  6.  M. Ferro, L. Leclerc, M. Sleiman, B. Marchiori, J. Pourchez, R. Owens and M. Ramuz, “Effect of E Cigarette Emissions on Tracheal Cells Monitored at the Air–Liquid Interface Using an Organic Electrochemical Transistor”; Adv. Biosystems, (2019). (IF= NA)
  7. M. Nasreldin, R. Delattre, B. Marchiori, M. Ramuz, S. Maria, J. L. de Bougrenet de la Tocnaye, “Microstructured electrodes supported on serpentine interconnects for stretchable electronics”, APL Mat., 7, 3, (2019). (IF=4.13)
  8. S. de Mulatier, M. Ramuz, D. Coulon, S. Blayac, and R. Delattre, “Mechanical characterization of soft substrates for wearable and washable electronic systems” APL Mat., 7, 031505 (2019). (IF=4.155).
  9. G. D. Salian, C. Lebouin, M. Galeyeva, A. P. Kurbatov, T. Djenizian, “Electrodeposition of polymer electrolyte into porous LiNi0.5Mn1.5O4 for high performance all-solid-state microbatteries”, Front. Chem, 6, 675 (2019). (IF=4.16)
  10.   A. Bahramian, Eyraud, S. Maria, F. Vacandio, T. Djenizian, P. Knauth, “Enhancing the corrosion resistance of Cu/Ni-P/Au electrical contacts by electropolymerized poly(methyl methacrylate)”, Corros. Sci., 149, 75 (2019). (IF=4.86)
  11. V. A. Sugiawati, F. Vacandio, Y. Ein-Eli, T. Djenizian, “Electrodeposition of polymer electrolyte into carbon nanotube tissues for high performance flexible Li-ion microbatteries”, APL Mat., 7, 031506 (2019). (IF=4.13)
  12. H. Fraoucene, V. A. Sugiawati, D. Hatem, M. S. Belkaid, F. Vacandio, M. Eyraud, M. Pasquinelli, T. Djenizian, “Optical and Electrochemical Properties of Self-Organized TiO2 Nanotube Arrays From Anodized Ti−6Al−4V Alloy”, Front. Chem., 6, (2019). (IF=4.16)
  13. M. Nasreldin, R. Delattre, M. Ramuz, C. Lahuec, T. Djenizian, J.-L. de Bougrenet de la Tocnaye. “Flexible Micro-Battery for Powering Smart Contact Lens”; Sensors, 19, (2019). (IF= 3)
  14. A. Ravichandran, M. Ramuz, S. Blayac. “Increasing surface charge density by effective charge accumulation layer inclusion for high-performance triboelectric nanogenerators”; MRS Communications; 1-8; (2019). (IF= 1.93)
  15. S. Regal, D. O’Connor, P. Brige, R. Delattre, T. Djenizian, M. Ramuz. “Determination of optical parameters of the porcine eye and development of a simulated model”, Journal of biophotonics, (2019). (IF= 3.8)
  16. Sopha, A. T. Tesfaye, R. Zazpe, J. Michalika, F. Dvorak, L. Hromadko, M. Krbal, J. Prikryl, T. Djenizian, J. M. Macak.”ALD growth of MoS2 nanosheets on TiO2 nanotube supports“, FlatChem, 17, 100130 (2019). (IF=3.93)
  17. T. Tesfaye, F. Dumur, D. Gigmes, S. Maria, L. Monconduit, T. Djenizian, “Superior Electrochemical Performance of Thin-Film Thermoplastic Elastomer-Coated SnSb as an Anode for Li-ion Batteries“, Sci. Rep., 9, 1 (2019). (IF= 4.122).
  18. Djenizian, B. C. K. Tee, M. Ramuz, L. Fang, “Advances in flexible and soft electronics“, APL Mat., 7, 031201 (2019). (IF=4.296)
  19. Bahramian, M. Eyraud, F. Vacandio, V. Hornebecq, T. Djenizian, P. Knauth, “Single-step electrodeposition of superhydrophobic black NiO thin films“, J. Appl. Electrochem., 49, 621 (2019). (IF= 2.366).
  20. V. A. Sugiawati, F. Vacandio, C. Perrin-Pellegrino, A. Galeyeva, A. P. Kurbatov and T. Djenizian, “Sputtered Porous Li-Fe-P-O Film Cathodes Prepared by Radio Frequency Sputtering for Li-ion Microbatteries“, Sci. Rep., 9, 11172 (2019). (IF= 4.12)
  21. Fliegans, M. Morvan, S. Bensalem, C. Calmes, J. Anthony, S. Sanaur. “The Direct Solution‐Process Crystallization of π‐Conjugated Small Molecules In‐Situ Integrated Planar Electrodes”, Phys. Status Solidi A, 216: 1900617, (2019). (IF= 2.3)
  22. V. A. Sugiawati, F. Vacandio, A. Galeyeva, A. P. Kurbatov, T. Djenizian, “Enhanced Electrochemical Performance of Electropolymerized Self-Organized TiO2 Nanotubes Fabricated by Anodization of Ti Grid“, Frontiers in Physics, 7, 179 (2019). (IF=2.64)

2018

  1. V. A. Sugiawati, F. Vacandio, P. Knauth, T. Djenizian, “Sputter-Deposited Amorphous LiCuPO4 Thin Film as Cathode Material for Li-ion Microbatteries“, ChemistrySelect, 3, 405, (2018)
  2. S. de Mulatier, M. Nasreldin, R. Delattre, M. Ramuz, T. Djenizian, “Electronic Circuits integration in textile for data processing in wearable technologies“, Adv. Mater. Technol., accepted manuscript (15/01/2018)
  3. M. Braglia, I. V. Ferrari, L. Pasquini, T. Djenizian, M. Sette, M. L. DiVona, P. Knauth, “Electrochemical synthesis of thin, dense, and conformal anion exchange membranes with quaternary ammonium groups“, Electrochim. Acta, 265, 78 (2018). (IF=4.8)
  4. G. D. Salian, B. M. Koo, C. Lefevre, T. Cottineau, C. Lebouin, A. T. Tesfaye, P. Knauth, V. Keller, T. Djenizian, “Niobium Alloying of Self-Organized TiO2 Nanotubes as an Anode for Lithium-Ion Microbatteries“, Adv. Mater. Technol., 3, 1700274, (2018)
  5. M. ElMahmoudy, A. M. Charrier, G. G. Malliaras, S. Sanaur, “Facile Nanopatterning of PEDOT:PSS Thin Films“, Adv. Mater. Technol., 3, 5, 1700344, (2018)
  6. B. Marchiori, R. Delattre, S. Hannah, S. Blayac, M. Ramuz, “Laser-patterned metallic interconnections for all stretchable organic electrochemical transistors”
    Scientific reports 8 (1), 8477, (2018). (IF=4.8)
  7. O. Kassem, M. Saadaoui, M. Rieu, S. Sao-Joao, J. P. Viricelle, “Synthesis and inkjet printing of sol–gel derived tin oxide ink for flexible gas sensing application” J Mater Sci (2018). (IF=2.6)
  8. M. ElMahmoudy, V. F. Curto, M. Ferro, A. Hama, G. G. Malliaras, R. P. O’Connor, S. Sanaur, “Electrically controlled cellular migration on a periodically micropatterned PEDOT:PSS conducting polymer platform” J. Appl. Polym. Sci., 135, 2018. (IF= 1.67 )
  9. E. Bihar, T. Roberts, Yi Zhang, E. Ismailova, T. Hervé, G. G. Malliaras, J. B. De Graaf, S. Inal and M. Saadaoui, “Fully printed all-polymer tattoo/textile electronics for electromyography”, Flex. Print. Electron., vol. 3, no. 3, (2018).
  10. I. Lachebi, A. Fedala, T. Djenizian, T. Hadjersi, M. Kechouane, “Morphological and optical properties of aluminum nanoparticles deposited by thermal evaporation on heated substrates“, Surf. Coat. Technol., 343, 160 (2018). (IF=2.906)

2017

  1. R. Haque, E. Ogam, P. Benaben, X. Boddaert, “Inkjet-Printed Membrane for a Capacitive Acoustic Sensor: Development and Characterization Using Laser Vibrometer“, Sensors , 17, 1056, (2017). (IF=2.44)
  2. M. Braglia, I. V. Ferrari, T. Djenizian, S. Kaciulis, P. Soltani, M. L. Di Vona, P. Knauth, “Bottom-up electrochemical deposition of poly(styrene sulfonate) on nano-architectured electrodes“, ACS Appl. Mater. Interfaces, (in press(2017). IF=(7.14)
  3. H. Sopha, G. D. Salian, R. Zazpe, J. Prikryl, L. Hromadko, T. Djenizian, J. M. Macak, “ALD Al2O3‑Coated TiO2 Nanotube Layers as Anodes for Lithium-Ion Batteries”, ACS Omega, (in press 2017).
  4. T. Tesfaye, Y. Gogotsi and T. Djenizian, “Tailoring the morphological properties of anodized Ti3SiC2 for better power density of Li-ion microbatteries”, Electrochem. Commun., 81, 29, (2017). (IF=4.57)
  5. I. V. Ferrari, M. Braglia, T. Djenizian, and P. Knauth, “Electrochemically engineered single Li-ion conducting solid polymer electrolyte on titania nanotubes for microbatteries” , J. Power Sources, 353, 95, (2017). (IF=6.33)
  6. Bazin, H. B. Seo, C. M. Suehs, M. Ramuz, M. De Waard, and M. B. Gu, “Profiling the biological effects of wastewater samples via bioluminescent bacterial biosensors combined with estrogenic assays,” Environ. Sci. Pollut. Res., vol. 24, no. 1, pp. 33–41, (2017). (IF= 2.76)
  7. X. Strakosas, M. Huerta, M. J. Donahue, A. Hama, A.-M. Pappa, M. Ferro, M. Ramuz, J. Rivnay, and R. M. Owens. “Catalytically Enhanced Organic Transistors for in Vitro Toxicology Monitoring through Hydrogel Entrapment of Enzymes”, Journal of Applied Polymer Science, 134, 7, (2017). (IF= 1.87)
  8. M. ElMahmoudy, S. Inal, A. Charrier, I. Uguz, G. G. Malliaras, S Sanaur
    “Tailoring the Electrochemical and Mechanical Properties of PEDOT:PSS Films for Bioelectronics“, Macromolecular Materials and Engineering, 302(5), 1600497, (2017). (IF= 2.86)
  9. G. Salian, C. Lebouin, A. Demoulin, S. Maria, P. Knauth, M. Lepikhin, A. Galeyeva, A. Kurbatov, and T. Djenizian, “Electrodeposition of polymer electrolyte in nanostructured electrodes for enhanced electrochemical performance of thin-film Li-ion microbatteries“, J. Power Sources, 340, 242, (2017). (IF= 6.3)
  10. E. Bihar, T. Roberts, E. Ismailova, M. Saadaoui, M. Isik, A.S. Sanchez, D. Mecerreyes, T. Hervé, J.B. De Graaf, G.G. Malliaras, “Fully printed electrodes on stretchable textiles for long‐term electrophysiology“, Advanced Materials Technologies 2 (4), (2017). (New journal, Wiley-VCH)
  11. E. Bihar, T. Roberts, M. Saadaoui, T. Hervé, J.B. De Graaf, G.G. Malliaras, “Inkjet‐printed PEDOT: PSS electrodes on paper for electrocardiography“, Advanced Healthcare Materials 6 (6), (2017). (IF= 5.11)
  12. V. F. Curto, B. Marchiori, A. Hama, A.M. Pappa, M. Ferro, M. Braendlein, J. Rivnay, M. Fiocchi, G. Malliaras, M. Ramuz, R. Owens, “Organic transistor platform with integrated microfluidics for in-line multi-parametric in vitro cell monitoring“, Microsystems & Nanoengineering 3, (2017). (IF= NA)
  13. A. T. Tesfaye, Y. D. Yücel, M. K. S. Barr, L. Santinacci, F. Vacandio, F. Dumur, S. Maria, L. Monconduit, T. Djenizian, “The Electrochemical Behavior of SnSb as an Anode for Li-ion Batteries Studied by Electrochemical Impedance Spectrospcopy and Electron Microscopy“, Electrochim. Acta , 256, 155, (2017). (IF=4.798)
  14. Zymelka, B. Matveev, S. Aleksandrov, G. Sotnikova, G.Gavrilov and M. Saadaoui, “Time-resolved study of variable frequency microwave processing of silver nanoparticles printed onto plastic substrates”, Flex. Print. Electron., vol. 2, no. 4, p. 045006, (2017)
  15. A. Koutsouras, E. Bihar, J. A. Fairfield, M. Saadaoui, G. Malliaras, “Part II: Fabrication Approaches for Conducting Polymer Devices”, Green Materials for Electronics, Wiley, (2017)
  16. N. Selmene, S. Blayac, M. Muller, G. Abib, “Development of a Compact Acquisition System for Touch Location on a Conformable Monoport Distributed Sensor“, Journal of electrical engineering, pp.74 – 83, (2017)
  17. M.Bella, C.Rivero, S.Blayac, H.Basti, M.C.Record, P.Boulet, “Oleylamine-assisted solvothermal synthesis of copper antimony sulfide nanocrystals: Morphology and phase control“, Materials Research Bulletin, 90, pp. 188-194, (2017). (IF=2.5)

2016

  1. A. T. Tesfaye, O. Mashtalir, M. Naguib, M. W. Barsoum, Y. Gogotsi, and T. Djenizian, “Anodized Ti 3 SiC 2 As an Anode Material for Li-ion Microbatteries,” ACS Appl. Mater. Interfaces, vol. 8, no. 26, pp. 16670–16676, (2016). (IF = 7.50)
  2. T. Roberts, J. B. De Graaf, C. Nicol, T. Herv?, M. Fiocchi, and S. Sanaur, “Flexible Inkjet-Printed Multielectrode Arrays for Neuromuscular Cartography,” Adv. Healthc. Mater., vol. 5, no. 12, pp. 1462–1470, (2016). (IF = 5.76)
  3. E. Bihar, Y. Deng, T. Miyake, M. Saadaoui, G. G. Malliaras, and M. Rolandi, “A Disposable paper breathalyzer with an alcohol sensing organic electrochemical transistor,” Sci. Rep., vol. 6, no. 1, (2016). (IF = 4.85)
  4. M. Makrygianni, A. Ainsebaa, M. Nagel, S. Sanaur, Y.S. Raptis, I. Zergioti, D. Tsamakis, “Laser printed organic semiconductor PQT-12 for bottom-gate organic thin-film transistors: Fabrication and characterization,” Appl. Surf. Sci., vol. 390, pp. 823–830, (2016). (IF = 3.39)
  5.  V. A. Sugiawati, F. Vacandio, M. Eyraud, P. Knauth, and T. Djenizian, “Porous NASICON-Type Li3Fe2(PO4)3 Thin Film Deposited by RF Sputtering as Cathode Material for Li-Ion Microbatteries,” Nanoscale Res. Lett., vol. 11, no. 1, (2016). (IF = 2.83)
  6. O. Mhibik, S. Chénais, S. Forget, C. Defranoux, and S. Sanaur, “Inkjet-printed vertically emitting solid-state organic lasers,” J. Appl. Phys., vol. 119, no. 17, p. 173101, (2016). (IF = 2.1)
  7. M. Huerta, J. Rivnay, M. Ramuz, A. Hama, and R. M. Owens, “Early Detection of Nephrotoxicity In Vitro Using a Transparent Conducting Polymer Device,” Appl. Vitro Toxicol., vol. 2, no. 1, pp. 17–25, (2016).
  8.  R. I. Haque, R. Vié, M. Germainy, L. Valbin, P. Benaben, and X. Boddaert, “Inkjet printing of high molecular weight PVDF-TrFE for flexible electronics,” Flex. Print. Electron., vol. 1, no. 1, p. 015001, (2016).
  9. Ortiz, P. Lavela, J. L. Tirado, I. Hanzu, T. Djenizian, and P. Knauth, “Nanostructured TiO2 materials for a new generation of  Li-ion batteries”, in Electrochemical Nanofabrication: Principles and Applications, Ed. Di Wei, pp. 171-221, (Pan Stanford Publishing, 2016).
  10.  N. Selmene, S. Blayac, M. Muller, and G. Abib, “Compact acquisition system for a flexible large area monoport tactile surface,” IEEE pp. 1–4, (2016).
  11.  N. Selmene, S. Blayac, M. Muller, and G. Abib, “Innovative large area touch sensor: Design and tests of a compact acquisition system,” IEEE pp. 1–6, (2016).

2015

  1. C. Talagrand, X. Boddaert, D.G. Selmeczi, C. Defranoux, P. Collot, “Ellipsometry study of process deposition of amorphous Indium Gallium Zinc Oxide sputtered thin films”, Thin Solid Films, 590, 134, (2015). (IF = 1.759)
  2. M. Bella, S. Blayac, C. Rivero, V. Serradeil, P. Boulet, “Efficiency assessment of novel materials based flexible thermoelectric devices by a multiscale modeling approach”, Computational Materials Science, 108, 264, (2015). (IF = 2.131)
  3. S. Orellana, B. Arrazat P. Fornara C. Rivero, S. Blayac, P. Montmitonnet, K. Inal, “Robust design of thermo-mechanical MEMS switch embedded in aluminium BEOL interconnect”, Microelectronics Reliability, 55, 1896, (2015). (IF = 1.759)
  4. R. Haque, C. Loussert, M. Sergent, P. Benaben, X. Boddaert, “Optimization of capacitive acoustic resonant sensor using numerical simulation and design of experiment”, Sensors, 15, 26018, (2015). (IF = 2.033)
  5. E. Drahi, S. Blayac, A. Borbély, P. Benaben, “Impact of Ink Synthesis on Processing of Inkjet-Printed Silicon Nanoparticles Thin Films: a Comparison of Rapid Thermal Annealing and Photonic Sintering”, Thin Solid Films, 574, 169, (2015). (IF = 1.759)
  6. R. Haque, E. Ogam, C Loussert, P. Benaben, X. Boddaert, “Fabrication of Capacitive Acoustic Resonators Combining 3D Printing and 2D Inkjet Printing Techniques”, Sensors, 15, 26018, (2015). (IF=2.033)
  7. D. Unnikrishnan, D. Kaddour, S. Tedjini, E. Bihar, M. Saadaoui, “CPW-fed Inkjet Printed UWB Antenna on ABS-PC for integration in Molded Interconnect Devices technology” IEEE Antennas and Wireless Propagation Letters, 14, 1124, (2015). (IF=1.75)
  8. M. Ramuz, K. Margita, A. Hama, P. Leleux, J. Rivnay, I. Bazin, R. Owens, “Optimization of a Planar All‐Polymer Transistor for Characterization of Barrier Tissue”, ChemPhysChem, 16, 1210, (2015). (IF = 3.1)
  9. J. Rivnay, M. Ramuz, P. Leleux, A. Hama, M. Huerta, R.M. Owens, “Organic electrochemical transistors for cell-based impedance sensing”, Applied Physics Letters, 106, 043301, (2015). (IF = 3.3)
  10. M. Ramuz, A. Hama, J. Rivnay, P. Leleux, R.M. Owens, “Monitoring of cell layer coverage and differentiation with the organic electrochemical transistor”, Journal of Materials Chemistry B, 3, 5971, (2015). (IF = 4.9)
  11. J. Rivnay, P. Leleux, A. Hama, M. Ramuz, M. Huerta, G. Malliaras, R. Owens, “Using white noise to gate organic transistors for dynamic monitoring of cultured cell layers”, Scientific Reports, 5, 11613, (2015). (IF = 5.5)
  12. J. Rivnay, P. Leleux, M. Ferro, M. Sessolo, A. Williamson, D. Koutsouras, D. Khodagholy, M. Ramuz, X. Strakosas, R. Owens, C. Benar, J. M. Badier, C. Bernard, G. Malliaras, “High-performance transistors for bioelectronics through tuning of channel thickness”, Science Advances, 1, 1400251, (2015). (IF = NA)
  13. M. Huerta, J. Rivnay, M. Ramuz, A. Hama, R.M. Owens, “Research Update: Electrical monitoring of cysts using organic electrochemical transistors”, APL Materials, 3, 030701, (2015). (IF=4.3)
  14. A. Tesfaye, R. Gonzales, J.L. Coffer, and T. Djenizian, “Porous Silicon Nanotube Arrays as Anode Material for Li-Ion Batteries”, ACS Appl. Mater. Interfaces, 7, 20495, (2015). (IF=7.145)
  15. M. Q. Zhao, M. Sedran, Z. Ling, M. Lutkatskaya, O. Mashtalir, M. Ghidiu, B. Dyatkin, D. J. Tallman, and T. Djenizian, M. W. Barsoum, and Y. Gogotsi, “Synthesis of Carbon/Sulfur Nanolaminates by Electrochemical Extraction of Titanium from Ti2SC”, Angew. Chem. Int. Ed. Eng., 54, 4810, (2015). (IF=11.709)
  16. N. Plylahan, A. Demoulin, C. Lebouin, P. Knauth, T. Djenizian, “Mechanism study of Li+ insertion into titania nanotubes”, RSC Adv., 5, 28474, (2015). (IF=3.289)
  17. N. Plylahan, M. Letiche, M. Barr, B. Ellis, S. Maria, T. N. T. Phan, E. Bloch, P. Knauth, and T. Djenizian, “High energy and power density TiO2 nanotube electrodes for single and complete lithium-ion batteries”, J. Power Sources, 273, 1182, (2015). (IF=6.333)