– Métallurgie, caractérisation microstructurale et essais mécaniques
– Techniques de fabrication additive des métaux et polymères
– Procédés de mise en forme à chaud et de traitement thermique des métaux
– Modélisation analytique de l’évolution microstructurale des métaux
– Modélisation par éléments finis des matériaux architecturés

– Conception mécanique de nouveaux matériaux architecturés
– Design de nouveaux alliages et élaboration de matériaux modèles
– Fabrication additive de nouveaux métaux et alliages

– Cours de Master – Procédés de mise en forme à haute température des métaux
– Sélection des matériaux

– Stress Concentration and Mechanical Strength of Cubic Lattice Architectures, Materials 11 (2018) pp.1146
– A continuous crystallographic approach to generate cubic lattices and its effect on relative stiffness of architectured materials, J. Favre, P. Lohmuller, B. Piotrowski, S. Kenzari, P. Laheurte, F. Meraghni, Additive Manufacturing 21 (2018) pp.359-368
– Contribution of Computational Model for Assessment of Heart Tissue Local Stress Caused by Suture in LVAD Implantation, A. Chalon, J. Favre, B. Piotrowski, V. Landmann,
D. Grandmougin, J-P. Maureira, P. Laheurte, N. Tran, Journal of the Mechanical Behavior of Biomedical Materials, 10.1016/j.jmbbm.2018.03.032
– Modeling dynamic recrystallization of L-605 cobalt superalloy, J. Favre, D. Fabrègue, K. Yamanaka, A. Chiba, Materials Science and Engineering: A 653 (2016) 84-92
– Grain growth and static recrystallization kinetics in Co-20Cr-15W-10Ni (L-605) cobalt-base superalloy, Favre, J., Fabrègue, D., Maire, E., Chiba, A., Philosophical Magazine (2014), doi: 10.1080/14786435.2014.903342
– Nucleation of recrystallization in fine-grained materials: An extension of the Bailey-Hirsch criterion, Favre, J., Fabrègue, D., Chiba, A., Bréchet, Y., Philosophical Magazine Letters 93 (11) PP. 631 – 639 (2013), doi: 10.1080/09500839.2013.833352
– Modeling grain boundary motion and dynamic recrystallization in pure metals, Favre, J., Fabregue, D., Piot, D., Tang, N., Koizumi, Y., Maire, E., Chiba, A., Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44 (13) PP. 5861 – 5875 (2013), doi: 10.1007/s11661-013-1914-5
– Deformation behavior and dynamic recrystallization of biomedical Co-Cr-W-Ni (L-605) alloy, Favre, J., Koizumi, Y., Chiba, A., Fabregue, D., Maire, E., Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44 (6) PP. 2819 – 2830 (2013), doi: 10.1007/s11661-012-1602-x
– Recrystallization of L-605 cobalt superalloy during hot-working process, Favre, J., Koizumi, Y., Chiba, A., Fabregue, D., Maire, E., TMS Annual Meeting PP. 257 – 264 (2012)
– Dynamic recrystallization of biomedical Co-Cr-W-Ni (L-605) alloy, Favre, J., Chiba, A., Koizumi, Y., Fabrègue, D., Maire, E., Materials Science Forum 706-709 PP. 472 – 477 (2012)