Biographie
Mathilde Rieu received her PhD degree in Materials Science and Engineering in 2009 from Toulouse University (France). She worked on the SOFC technology at CIRIMAT laboratory and after a post-doctoral position at CEA Grenoble she was recruited in 2010 as assistant professor at the Ecole des Mines de Saint-Etienne (France). She works in the field of chemical gas sensors at the Center for Chemical Engineering “SPIN” – LGF laboratory Reactivity of solid-gas systems, Instrumentation and Sensors.
Activités de recherche
Solid-Gas interactions
Functional material coatings
Chemical Gas Sensors
Single Chamber Solid Oxide Fuel Cell
Enseignement
Inorganic chemistry, Physico-chemical characterisations of solids, Solid-gas interactions
Formation
Ph.D. in Materials Science and Engineering, Université de Toulouse, France (2009)
M.Sc. in Materials Science, Université de Toulouse, France (2006)
Publications HAL
- Mathilde Rieu, Bastien Le Porcher, Maxime Minot, Jean-Paul Viricelle. Development of Platinum Heater by Inkjet Printing onto Polyimide Substrate. EUROSENSORS 2026, Sep 2026, Zurich (CH), Switzerland. AMA Service GmbH, Abstract Book Eurosensors 2026, pp.400 - 401 /Mo-CHS-06, 2026, ⟨10.5162/eurosensors2026/Mo-CHS-06⟩. ⟨emse-05798205⟩
- Abhishek Kumar, Sudalaimani Sudalaimuthu, Maxime Minot, Mathilde Rieu. Electrosynthesized porous tin oxide film for gas sensors applications. EUROSENSORS 2026, Sep 2026, Zurich (CH), Switzerland. AMA Service GmbH, Abstract Book Eurosensors 2026, pp.406 - 407 /Mo-CHS-09, 2026, ⟨10.5162/eurosensors2026/Mo-CHS-09⟩. ⟨emse-05800108⟩
- Abhishek Kumar, Johann Lüder, Petr Bečvář, Eric Lesniewska, Rita Meunier-Prest, et al.. Unveiling the interfacial charge dynamics in organic heterostructures: from density functional theory calculations to application in ambipolar sensors. ACS Applied Electronic Materials, 2026, 8 (11), pp.4634 à 4648. ⟨10.1021/acsaelm.6c00409⟩. ⟨emse-05784462⟩
- Abhishek Kumar, Bastien Le Porcher, Maxime Minot, Riadh Lakhmi, Jean-Paul Viricelle, et al.. Fully printed SnO2 gas sensors for redox and VOCs gases detection. CMC2 automne 2024 (Club MicroCapteurs Chimiques), Oct 2024, Clermont-Ferrand, France. ⟨emse-05085355⟩
- Bastien Le Porcher, Mathilde Rieu, Jean-Paul Viricelle. Development of Metallic inks for the Fabrication of a Flexible Metal Oxide Gas Sensors by Inkjet Printing Process. EUROSENSORS XXXVI, Sep 2024, Debrecen, Hungary. . ⟨emse-05141868⟩
- Jean-Paul Viricelle, Yuwei Shen, Rouba Alrammouz, Marc Fischer, Maxime Minot, et al.. Multi-sensor Platform for Indoor Air Quality Monitoring. EUROSENSORS XXXVI, Sep 2024, Debrecen, Hungary. . ⟨emse-05140222⟩
- Riadh Lakhmi, Marc Fischer, Quentin Darves-Blanc, Rouba Alrammouz, Mathilde Rieu, et al.. Linear and non-linear modelling methods for a gas sensor array developed for process control applications. Sensors, 2024, 24 (11), pp.3499. ⟨10.3390/s24113499⟩. ⟨emse-04611143⟩
- Bastien Le Porcher, Jean-Paul Viricelle, Mathilde Rieu. Development of Gold Inks for Inkjet Printing of Gas Sensors Electrodes on Plastic Support. Electronics, 2024, 13 (11), pp.2110. ⟨10.3390/electronics13112110⟩. ⟨emse-04611513⟩
- Bastien Le Porcher, Mathilde Rieu, Jean-Paul Viricelle. Synthèse et formulation d’encres d’or pour l’impression jet d’encre d’électrodes de capteurs de gaz. CMC2 - Réunion de printemps du Club MicroCapteurs Chimiques, LMGP (Laboratoire des Matériaux et du Génie Physique), Mar 2024, Grenoble, France. ⟨emse-05064513⟩
- Riadh Lakhmi, Jean-Paul Viricelle, Rouba Alrammouz, Mathilde Rieu. From the Modeling of an Electrochemical YSZ-Based Gas Sensor Used in Electrolysis Mode. Sensors, 2024, 24 (2), pp.658. ⟨10.3390/s24020658⟩. ⟨emse-04409438⟩
Documents récupérés de l'archive ouverte HAL 
